How to size solar for a Brisbane home from your power bill, with local output figures, roof and export limits, EV and battery planning, and worked examples.

Ask ten people how much solar you need and you will get ten answers. Your neighbour says 6.6 kW "like everyone else". A salesperson says you need 13 kW "while the rebate lasts". Your brother-in-law reckons you should just fill the roof.
The honest answer is that it depends on how much power your household uses, when you use it, how much roof you have, and what is coming next, like a battery or an electric car. The good news is you can get surprisingly close to the right number with a recent power bill and a bit of simple maths.
Here is how to size a solar system for a Brisbane home, with worked examples for small, medium and large households. The numbers are illustrative, but the method is the same one a good designer uses.
Grab your most recent electricity bill, or better still, the last 12 months of them. Look for:
Divide the kWh by the days, and you have your average daily usage. For example, 1,800 kWh over a 90-day quarter is 20 kWh per day.
Do this for a summer bill and a winter bill if you can. Brisbane households often use noticeably more in summer when the air conditioning is working hard, and your system needs to make sense across the whole year, not just one quarter.
If you have a smart meter, your retailer may be able to give you interval data showing when you use power during the day. That is gold for sizing, because solar only produces during daylight hours.
Quick tip: Note anything on your bill that is on a separate tariff, such as a controlled load for hot water. That usage counts too, and it may be worth moving into the solar hours.
Brisbane is a good place for solar. A commonly used figure, based on Clean Energy Council guidance, is that each kilowatt of panels produces about 4.2 kWh per day on average across the year.
That average hides a big seasonal swing. Figures based on Bureau of Meteorology data suggest a Brisbane system might produce roughly 5.4 kWh per kW per day in summer and around 3.2 kWh per kW per day in winter. Your own results will depend on roof direction, tilt, shading, panel quality and how clean the panels are.
So as a rough guide:
| System size | Average per day | Summer day | Winter day |
|---|---|---|---|
| 5 kW | about 21 kWh | about 27 kWh | about 16 kWh |
| 6.6 kW | about 28 kWh | about 36 kWh | about 21 kWh |
| 10 kW | about 42 kWh | about 54 kWh | about 32 kWh |
| 13.2 kW | about 55 kWh | about 71 kWh | about 42 kWh |
These are ballpark estimates for a well-oriented, unshaded roof, not guarantees.
Here is where a lot of sizing advice goes wrong. Matching your annual solar production to your annual usage sounds sensible, but it ignores timing.
Solar produces most in the middle of the day. Many households use most of their power in the morning and the evening. Anything you do not use as it is generated gets exported, and in South East Queensland retailers set their own feed-in tariffs, which are now usually only a few cents per kWh. Meanwhile, the Energex Default Market Offer time-of-use peak rate for 2026 to 2027 is around 47.79c per kWh from 4pm to 9pm.
So the value of solar comes mainly from the power you use yourself. That means sizing is really about three questions:
Some retailers now offer the Solar Sharer Offer, which from 1 July 2026 gives eligible households free grid power between 11am and 2pm. It is opt-in and can change the maths for some homes, so it is worth factoring in when you compare plans.

Modern home panels are typically around 440 to 490 W each. A 6.6 kW system uses roughly 14 panels at 470 W and needs around 28 square metres of suitable roof. Shading, skylights, vents and the shape of the roof all eat into the usable space, and the direction each section faces affects how much it produces.
Most Australian homes have single-phase power, and a 5 kW inverter is a common choice for them. Installation rules for the solar rebate allow panels up to about 133% of the inverter's rating on systems without batteries, which is why 6.6 kW of panels on a 5 kW inverter is so popular. On the same logic, a 10 kW inverter can take up to about 13.3 kW of panels. Our guide to choosing an inverter explains the options.
On a standard connection in South East Queensland, Energex caps exports at up to 5 kW per phase, and total inverter capacity on a single-phase home is limited to 10 kVA. An optional dynamic connection can allow exports of up to 10 kW per phase most of the time, but drops to 1.5 kW if your internet connection fails. Check Energex's dynamic connections information for current details.
In practice, this means that on a big single-phase system without a battery, some of your midday production may be "clipped" because you cannot use or export it all. That is not necessarily a problem, but it is a reason not to simply fill the roof.
Older boards sometimes need work before solar can be connected. It is worth checking early. See our page on switchboard upgrades.
A system that suits you today might not suit you in three years. Two big changes to think about:
Adding panels later is possible, but it is often more complicated and costly than getting it right the first time.
Once you have a rough size in mind, our solar installation page explains how we design and install systems for Brisbane homes, and our solar battery page covers adding storage.
These examples are made up to show the method. They are not real customers, and your home could be quite different.
A couple who both work away from home, with gas cooking and modest air conditioning. Most of their usage is in the morning and evening.
A family of four with someone home a few days a week, split system air conditioning and electric hot water.
A larger family with ducted air conditioning, a pool pump and an EV planned for next year.
Amer_Image-p-1080.webp)
It remains a very common size because it pairs well with a 5 kW inverter. For many medium households it is a good fit, but smaller homes may not need it, and larger households, or those planning an EV or battery, often need more.
Not automatically. Bigger is not better if you cannot use the power, store it or export it. Inverter limits and Energex export limits also cap what a single-phase system can usefully deliver.
We will not promise that. The daily supply charge still applies, and evening usage still comes from the grid unless you have a battery. A well-designed system can significantly reduce what you buy from the grid.
One bill gets you started, but 12 months shows how usage changes with the seasons, which leads to a much better design.
Josh is a licensed electrician who designs and installs your system. Send through your bills and he will look at how much power you use, when you use it, your roof and what is coming next, then recommend a system size that makes sense for your household rather than the biggest one that fits. Book your free energy assessment.
Related