Blog · 
9 November 2026
 · 
6 min read

Smoke Alarm Rules from 1 January 2027: What Nundah, Chermside and Zillmere Homes Need

From 1 January 2027 every Queensland home needs interconnected photoelectric smoke alarms. Here is what that means for owners and landlords in Nundah, Chermside, Zillmere and nearby suburbs, and how to check your home.

Josh from Advance Electrical & Energy working on an electrical panel

If you live in Nundah, Chermside, Zillmere or anywhere else on Brisbane’s northside, there is a date worth putting in the calendar: 1 January 2027. From then, every existing home in Queensland needs interconnected photoelectric smoke alarms in the right places. That includes owner-occupied houses, townhouses and units, not only rentals.

This guide explains what the rules require, who they already apply to, what tends to come up in the older homes and units around our base in Nundah, and how to check where you stand before the end-of-year rush.

The short version

  • From 1 January 2027: all existing private homes, townhouses, units and manufactured homes in Queensland need interconnected photoelectric smoke alarms.
  • Already in force: homes being sold, and rentals at the start or renewal of a lease, have needed compliant alarms since 1 January 2022. New homes and substantial renovations have needed them since 1 January 2017.
  • The rules come from the Queensland Fire Department. Their smoke alarm page is the official reference.

What a compliant setup looks like

Under the Queensland requirements, smoke alarms in a home must:

  • Be photoelectric and comply with Australian Standard AS 3786-2014. Ionisation alarms do not meet the rules.
  • Be interconnected, so when one alarm sounds, they all sound. Interconnection can be hardwired or wireless.
  • Be in the right places: in every bedroom, in hallways that connect bedrooms to the rest of the home (or between the bedrooms and the rest of the home if there is no hallway), and on every storey.
  • Have a suitable power source: either hardwired to mains power or powered by a 10-year non-removable battery. If an existing alarm is hardwired, its replacement must also be hardwired.
  • Be less than 10 years old. Alarms past their 10-year life need replacing.

Quick check: press the test button on one alarm. If only that alarm sounds, your alarms are not interconnected and the home will not meet the 2027 rules.

What we see in Nundah and surrounding homes

The northside has a real mix of housing, and each type has its own quirks when it comes to smoke alarms.

Queenslanders and older homes (Nundah, Wooloowin, Clayfield, Kalinga)

Many older homes still have a single hardwired alarm in a hallway, often an ionisation type installed decades ago. Bringing these homes up to standard usually means adding alarms to every bedroom and interconnecting the lot. High-set and two-storey homes need an alarm on each level, including a downstairs area that has been built in.

Ceiling access can be tight in older homes, so running new cable to every room is not always practical. Wireless interconnected alarms can solve that, as long as any alarm replacing a hardwired one is itself hardwired.

Post-war and 1970s to 1990s homes (Wavell Heights, Zillmere, Aspley)

These homes often have alarms in hallways but not bedrooms, and the alarms themselves may be well past 10 years old. It is a good time to check the switchboard too: if the home still has old fuses or circuits without safety switches, it is worth sorting out while an electrician is already there. Our guide to switchboard upgrades explains the signs.

Units and townhouses (Chermside, Lutwyche, Windsor)

Chermside in particular has a lot of newer apartments and townhouses, alongside older blocks. Each unit needs its own compliant, interconnected alarms. In newer buildings these may already be in place; in older blocks they often are not. Work inside your unit is usually yours to arrange, while common areas fall to the body corporate. Check your building’s by-laws before work starts.

If you are a landlord

Rental properties have had to meet the requirements at each new lease or renewal since 2022, so most northside rentals should already be compliant. Two ongoing obligations are worth remembering:

  • Landlords must test and clean the smoke alarms within 30 days before the start or renewal of a tenancy, and replace any that are flat, faulty or expired.
  • Tenants should test the alarms at least once every 12 months and let the landlord or property manager know if one is not working.

If you manage several properties, it helps to have an electrician check them together and keep a simple record of what was installed and when. Our property maintenance page covers how we work with landlords and property managers.

How to check your home in five minutes

  1. Count the bedrooms and storeys. You need an alarm in each bedroom, in the hallway outside them, and on every level.
  2. Look at each alarm. The label or the back of the alarm usually says whether it is photoelectric and shows a manufacture or expiry date.
  3. Press the test button. If the others do not sound with it, they are not interconnected.
  4. Note how they are powered. Hardwired alarms need hardwired replacements.
  5. Write it down. A quick list of rooms and alarm types makes it easy to get an accurate quote.

Do not leave it until December

With every remaining home in the state facing the same deadline, demand for compliant alarms and licensed electricians is expected to build towards the end of the year, right when the Christmas break starts. Sorting it out in November or early December avoids the scramble.

Electrician installing a fitting in a Brisbane home
Interconnected alarms can be hardwired or wireless, depending on the home.

Frequently asked questions

Do I need an electrician to install smoke alarms?

Hardwired alarms must be installed by a licensed electrician. Some 10-year battery alarms with wireless interconnection can be fitted by a homeowner, but they still need to be in the right locations and meet the standard. An electrician can confirm the layout and handle any hardwired replacements.

Can I mix hardwired and battery alarms?

Yes, as long as every alarm is photoelectric, they are all interconnected, and any alarm replacing a hardwired one is hardwired.

My home was built recently. Am I already compliant?

Homes built or substantially renovated since 1 January 2017 should already have interconnected photoelectric alarms. It is still worth pressing the test button to confirm they all sound together.

Does this apply to my granny flat or built-in downstairs?

If it is part of the home, it needs to be covered. Each storey needs an alarm, and bedrooms downstairs need their own.

Get your smoke alarms sorted

We are based in Nundah and install compliant, interconnected smoke alarms across North Brisbane and Moreton Bay, including Nundah, Chermside, Zillmere and Wavell Heights. You deal directly with the licensed electricians who do the work. See our smoke alarm service or call 0474 505 395.

Josh, licensed electrician and owner of Advance Energy
Questions? Talk directly to Josh
Licensed electrician and owner. Honest advice about what suits your home.

Related

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Your enquiry goes straight to Josh, a licensed electrician who designs and installs your system.
By submitting, you agree to Advance Energy contacting you about your quote.
Call Josh · 0474 505 395